颚式破碎机鄂破机破碎机价格生产厂家PE220x350/200x350

主要特点

1、破碎腔深而且无死区，提高了进料能力与产量。

2、其破碎比大，产品粒度均匀。

3、垫片式排料口调整装置，可靠方便，调节范围大，增加了设备的灵活性。

4、润滑系统可靠，部件更换方便，设备维护保养简单。

5、结构简单，工作可靠，运营费用低。

6、设备节能：单机节能15%～30%，系统节能一倍以上。

7、排料口调整范围大，可满足不同用户的要求。

8、噪音低，粉尘少。

运行环境

在将巨大石块破碎成小石块的过程中，道破碎机通常为“主”破碎机。历史长，也坚固的破碎机是颚式破碎机。为颚式破碎机喂料时，物料从顶部入口倒入含有颚齿的破碎室，颚齿以巨大力量将物料顶向室壁，将之破碎成更小的石块。支持颚齿运动的是一根偏心住，此偏心轴贯穿机身构架。偏心运动通常由固定在轴两端的飞轮所产生。飞轮和偏心支持轴承经常采用球面滚子轴承，轴承的工作环境极为苛刻。轴承必须承受巨大的冲击载荷，磨蚀性污水和高温。尽管此工作环境极为苛刻，颚式破碎机仍需非常可靠的工作，这是保证生产效率的关键一环。

Jaw cer | Jaw cer | Cer price | Cer manufacturerPE220x350/200x350

main features

1. The cing chamber is deep and has no dead zone, which improves the feeding capacity and output.

2. Its cing ratio is large, and the product particle size is uniform.

3. The gasket type discharge port adjustment device is reliable and convenient, with a large adjustment range, which increases the flexibility of the equipment.

4. The lubrication system is safe and reliable, with easy component replacement and simple equipment maintenance.

5. Simple structure, reliable operation, and low operating costs.

6. Equipment energy saving: Single unit energy saving of 15% to 30%, system energy saving of more than twice.

7. The adjustment range of the discharge port is large, which can meet the requirements of different users.

8. Low noise and minimal dust.

Operating environment

In the process of breaking large stones into small ones, the first cer is usually the "main" cer. The longest and strongest cer in history is the jaw cer. When feeding the jaw cer, the material is poured into the cing chamber containing jaw teeth from the top inlet. The jaw teeth exert tremendous force to push the material towards the chamber wall, cing it into smaller stones. The support for jaw tooth movement is an eccentric shaft that runs through the fuselage structure. Eccentric motion is usually generated by flywheels fixed at both ends of the shaft. Flywheels and eccentric support bearings often use spherical roller bearings, which work in extremely harsh environments. Bearings must withstand enormous impact loads, abrasive wastewater, and high temperatures. Despite the extremely demanding working environment, jaw cers still require very reliable operation, which is a key factor in ensuring production efficiency.